Pellet Burner

Task: burn pellets with minimum unburns. Burner must be connected to air-to-air heat exchanger for drying some textile paints.

Solution: Vortex Burner with average capacity 300 kW and maximum capacity 500 kW is installed. Due to local specific burner was designed to have an output at the lower part. Thus, burner has a double-chamber design where pellets are burnt in a two stages.

Burner can also be used for RDF, sawdust, peat and other nonstandard fuels.

Runs since the end of 2019. Spain, Albacete.