Task: Replace Heavy Fuel Oil (HFO, mazut) by a Coal Water Slurry (CWS) from coal wastes. Solution: Coal wastes in a form of filter cake are converted to CWS by a Wet Milling Machine. Then, CWS is artomized directly into a welz kiln by a pneumo-nozzle. CWS burn either autonomously or in parallel with HFO. …
Task: burn pellets with minimum unburns. Burner must be connected to air-to-air heat exchanger for drying some textile paints. Solution: Vortex Burner with average capacity 300 kW and maximum capacity 500 kW is installed. Due to local specific burner was designed to have an output at the lower part. Thus, burner has a double-chamber design …
While coal developments are mostly closed in EC there are many coal wastes deposits are waiting for the solution for environmental friendly utilization. At the last week of July Effective Energy Technologies has commissioned a technology complex for utilizing a mixture of coal wastes in a drying kiln. ‘Raw’ is a mixture of different coals …
Project Scope — Production of synthetic oil from coal. Description Coal Water Slurry (CWS) with solid/liquid ratio is produced on the first stage. Then, CWS goes to a gasification rector. Gasification products then converted to a synthetic oil. Solution EET GmbH has supplied WMM, generation 1 Customer provided gasification equipment and infrastructure Project runs since …
Task: produce Coal Water Slurry (CWS) for burning coal in a liquid form in a drying kiln. Solution: Wet Milling Machine is used for producing CWS. Coal wastes in a form of filter cake are used to produce CWS. Project is realized in 2016, Uzbekistan
Fully functioning skids based on our single units: milling complexes, multi stage milling and homogenization, etc.
Individual design based on your request.
We offer a set of technologies for wet milling of biomass, carbon, peat (turf) and others, and converting them into a homogeneous mixtures.
Our static reactors and RIAs can improve watered and heavy oil
Solid fuel can be used in a drying kiln
Static reactor is ideal unit for ultra-fine mixing liquids. Reduces viscosity, flash point and pour point for oil-based fuels, with or without additives.
